Talking about the Overprinting Technology of Tapping Printing Technique in Printing

When registering the next color version, the position marking device of the last color version shall be used for the loading; the flatness of the netting distance and the screen shall be the same as the previous color version. The upper and lower color version of the nesting position is to align the previous color school pattern with the gauge, and give (with suction, etc.), slowly moving the frame to register the two. At this time, the fixture is initially tightened, the squeegee angle, the press pressure retention, and the previous color plate mark are placed in the jig of the net frame, and the pattern matching of the screen plate pattern and the school plate pattern is observed, and the one-color plate is the same. Then try to print, and check the sample printing and registration conditions. Under normal conditions, the fitting error is between 1 and 2 mm. After 2 to 3 test impressions, the error is basically stable, and then the adjustment method is determined, or fine-tuned. Ink pad, or fine-tuning screen fixtures, should not blindly twisted, and even mess up the rules, so that the whole batch of substrates is not allowed to overprint, but can not arbitrarily change the baffle.

The trimming range is limited to 2mm, and screen devices should be adjusted beyond 2mm.

Sometimes in the case of a last resort, it may be necessary to adjust the gauges. If you cut off the stop gauge, you must re-mark the change and position of the gauge on the school board and separate the prints of the shift gauges. , so that when overprinting the next color, pay attention and make corresponding changes.

When printing by hand, no matter which color plate is printed, the same direction squeegee should be kept, because the misalignment squeegee doubles the chromaticity error.




Source: China Garment Printing Network

The plastic Woven Bag is made of polypropylene (English name pp)or polyethylene(English name pe)as the main raw material. It is extruded and stretched into flat silk, and then woven, woven and made into a bag.The common woven fabric density is 36 x 36 root /10cm² , 40 x 40 root / 10 cm & sup2; 48 x 48, root / 10 cm.    The Woven bags, there are many kinds of color can be customized according to customer requirements, non-toxic tasteless, to human body harm generally small, although that are made by various chemical plastics, but its environmental protection sex is stronger, and can be recycled.
Woven bags are widely used in the packaging and packaging of all kinds of articles.For example, industrial and agricultural products packaging bags, food packaging bags, travel transportation packaging bags, daily necessities packaging bags, etc.plastic woven bags

Plastic Woven Bags

Plastic Woven Bags,Rice Packing Bag,Plastic Pp Woven Bag,Pp Plastic Woven Bag

Shenzhen Riversky Packing Materials CO.,LTD , http://www.jtfibc.com