Flexo Printing: Batch and Environmental Protection

What is flexo printing: Flexo printing is a branch of letterpress printing. Flexographic printing is similar to letterpress printing in terms of printing principle. It differs from traditional letterpress printing in printing plate, ink composition and embossing process. The transfer of the image is accomplished by a photo-sensitive, flexible printing plate or a patterned rubber stick. In the United States, which originated in the early 1920s, the early use of aniline inks was toxic and failed to develop. Since then, the ink factory began to use acceptable color agents, and was renamed Flexographic Process at the 14th Packaging Conference in the United States in 1952.

The main advantages:

1. The substrate has strong adaptability;

2. Fast printing speed: Usually, the normal printing speed of the flexographic printing plate can reach 100m/min or more;

3. The UV ink or ordinary ink used is environmentally friendly.

4, large amount of ink, good saturation, suitable for large color, freehand design, soft gradient, blur effect is good;

5, more suitable for standardization: through the anilox roller on the network to transfer the amount of ink, you can change the anilox roller to adjust the amount of ink, once the appropriate selection of anilox roller, the color difference during the printing process is very small, to a certain extent This can reduce the basis for the operator’s experience;

6, has a rich connection after processing, easier to achieve the need for combination printing.

Limitations:

1, in the fine text and lines, dot gradient, the relative letterpress and lithography is not enough fine and soft;

2. The fuselage printing machine has a long fuselage, and the material loss of the tuning machine is relatively large;

3, high plate making requirements, high edition fees, there are certain requirements for the number of printing, short-term profit margin is small;

4. The plates and raw and auxiliary materials have not been localized domestically, and most of them still rely on imports;

5, the use of water-based ink, the speed is too fast when drying is not timely, cutting into a single sheet when the convergence error-prone;

6, overprint accuracy, outlets less than offset.

Field of application: Suitable for large-volume printing of paper, plastic, stickers.

Future trends: Offset printing, gravure printing and other printing methods are preconceived. People are accustomed to comparing the advantages of these printing methods with the disadvantages of flexographic printing. The characteristics of flexographic printing are often overlooked. In fact, the experience of foreign countries has proved that flexo printing can print high-grade prints. However, there must be corresponding equipment and corresponding plate raw and auxiliary materials as well as mature processes and high-level operators. With the continuous improvement of people's living standards, it also promotes a new round of technological innovation in flexographic printing. The main innovations of flexo printing are: 1 Non-shaft independent driving of flexo printing machine; 2 Widely used sleeve technology; 3 Digital plate making; 4CDI imaging technology; 5 automatic register control technology; 6UV drying technology. With the localization of flexographic plates, raw materials and auxiliary materials, the cost of flexo printing in China will become lower and lower, and the prospects for flexo printing will be bright.

The international protagonists of narrow-width flexo printing equipment: Italy's Chiado, U.S. McAndy, Newport, Denmark, Italy Omet, and Germany's Jalas;

Domestic masters: Shanghai Ziguang, Shaanxi Beiren, Qingzhou Yigao Hair, Xi'an Black Bull, Beiren Fuji, Wuxi Baonan, etc.;

End-user representatives: He Xuelu, Nestle, Sanjiu, Aikang, Hangzhou Minsheng, etc.


Certificate
ISO14001, ISO18000, ISO9001 Certificate,
and GS certificate from TUV Company of Germany.
Color Various, according to your requirements
Materials

A. Plastic parts: Imported LLDPE
B. Post: National standard galvanized steel pipe
C. Metals: Galvanized
D. Deck, stair, bridge: Wood inside with sponge , rubber or powder cover

E. Outer cover: Soft Covering PVC

(Different material is available according to your needs)
Advantage
a.Anti-UV
b.Anti-static
c.Security
d.Environmental protection
e.Uneasy to lose shape
Function


1.Can protect children safe when they playing indoor, and let they enjoy the play freely

2.Suitable for improving Children energy and imagination

3.Helping them grow up happily, cleverly, and healthily

Age Range Children
Apply to Amusement park, gymnasium, Kindergarten, Preschool, etc.
Packing Standard export packing
Remark

We can design and produce as your requirements


Indoor Electric Playground

Indoor Electric Playground, Amusement Park Rides, Indoor Electric Rides

Liben Group Corporation , https://www.indoortrampoline.de